MtWire.net

Comments

• October 15, 2012 7:44 PM
   FiddlinNita
   
  Thanks so much!!!
  
  0   0
  
• October 15, 2012 1:15 AM
   ShaunHoggan
    Project Holder
  Thanks to all the designers who put so much work and thought into this logo design. The quality was so good from every designer that the decision of which direction to go was extremly difficult. The method of selection was put out to vote by our customers and while the results were mixed, they did lean towards a paticular style. Special thanks to everyones quick responce to my requests at the last moment of debating so many alternatives. Everyone put in so much hard work in developing the final product. I could not be happier and know that each designer had a winning product at the end of the day. Ultimately there is only one winner and in this process the winner was drafts 121 and 122 because of it's simplicity, ease to print on shirts or other physical media. The Logo also did not have geographical constraints in the design which was a minor yet important concern. Best of luck to everyone involved in the process.
  
  0   0
  
• October 13, 2012 6:58 PM
   ShaunHoggan
    Project Holder
  77 removed in preference for 76.
  
  0   0
  
• October 13, 2012 6:29 PM
   ShaunHoggan
    Project Holder
  74, eliminated due to red color
  
  0   0
  
• October 13, 2012 5:46 PM
   ShaunHoggan
    Project Holder
  39, eliminated due to too dark of green color. With a lighter color of green it may work.
  
  0   0
  
• October 13, 2012 5:34 PM
   ShaunHoggan
    Project Holder
  63, after long debate, 63 is just not a winner... I am conflicted on this one, all external feedback says that the RED is killing it.
  
  0   0
  
• October 13, 2012 5:25 PM
   ShaunHoggan
    Project Holder
  35, eliminated in preference of 73
  
  0   0
  
• October 13, 2012 5:12 PM
   ShaunHoggan
    Project Holder
  Positive feedback to why I am eliminating drafts: 72, eliminated because of text and the graphic seems to thick 71, eliminated because of text and the graphic seems to thick 70, eliminated because of preference of text on 69 (more custom) 68, eliminated because of Grey text color and grey sphere 67, eliminated because color scheme of 66 looks more high tech 64, eliminated because, it should be combined with 65 (Please) 62, eliminated because it is nearly the same thing as 61, shorten choices for customers 60, eliminated because of preference for colors in 61 59, eliminated because, it is the same as 61 58, eliminated because it is the same as 59, shorten list for customers 57, eliminated because it is similar as 60 56, eliminated because it is similar as 60 54, eliminated because it is similar as 60 55, eliminated because it is similar as 60 53, cool but colors are not working 52, colors are not working 51, eliminated in preference of 44 50, Colors don't "POP" off the screen 48, eliminated in preference for 35 47, Eliminated in preference for 35 49, Eliminated because of preference for 48, also prefer long graphic to be green (not blue) 46, eliminated just because it likely will not work in the end 45, eliminated in preference for 46 43, eliminated in preference for 35 41, eliminated in preference for 61 40, eliminated in preference for 39 37, eliminated in preference for 35 36, eliminated in preference for 35 33, eliminated because of . after Mt. 32, eliminated because of . after Mt. 28, eliminated because of . after Mt. 27, eliminated because of . after Mt. 26, eliminated because of . after Mt. 25, eliminated because of multiple dashes hard to print on tee shirt and dot after Mt 22, eliminated in preference of 63 19, eliminated in preference of 63 17, eliminated in preference of 39 16, eliminated in preference of 39 14, eliminated in preference of 39 11, eliminated in preference of 39 10, eliminated in preference of 39 5, eliminated in preference of 39 4, eliminated in preference of 39 1, eliminated due to text choice. Love: 69, simple arcs, custom text, small ".net" Requests: 65, 64 combined into one... one for print, one for web 63, need non 3D versions for print, swap the green and red colors 60, 61, if picked will need multiple versions including 3D (web) and 44, change the . in the "i" to be blue (not green)
  
  0   0
  
• October 13, 2012 4:50 PM
   FiddlinNita
   
  OK. I understand.
  
  0   0
  
• October 13, 2012 4:00 PM
   ShaunHoggan
    Project Holder
  Designers, we are getting super close to the end of the project and I need to really narrow down the choices for my customers. You will notice that I am going to cut out a whole bunch of designs today (more so than usual) so that the choices are easier for my customers to pick from. Just because I eliminate the design, does not mean that I don't like components of your design, it just means that there are others that are closer to the look we are seeking. Seriously, I could not be happier with ALL of the drafts!!! they are so good!!!!
  
  0   0
  
• October 13, 2012 3:56 PM
   ShaunHoggan
    Project Holder
  FiddlinNita, 25 is popular but I am going to need to eliminate it because of the dot after the mt plus the multiple 3 lines, while popular, are going to be more difficult to sew on a shirt...
  
  0   0
  
• October 13, 2012 3:44 PM
   ShaunHoggan
    Project Holder
  Designers, I sent out a request 2 days ago for my customers to vote on the drafts thus far. I have received the most votes for the following drafts 25, 35 Since then, there have been many changes / additions. Drafts 43 - 69 are better than anything I have seen so I am going to send out another request for customers to vote again. The final decision will lean towards something that has a couple of drafts that will look good on the web (3D, shadow, etc) Printed in black and white, and also has the ability to be simple to sew on a hat, or screen print on a shirt meaning lots of little details may be eliminated by virtue of their difficulty in replicating on multiple medias (fabric etc...) Everyone has done such a great job and it will be difficult to pick a single draft at the end of the day. Thank you for all of your hard work thus far.
  
  0   0
  
• October 13, 2012 1:09 PM
   ShaunHoggan
    Project Holder
  Drafts 69-66 VERY Cool!!! New, fresh, High Tech
  
  0   0
  
• October 12, 2012 10:50 PM
   schary
   
  ok sir:), , , thanks i'll work hard for this project , , ,
  
  0   0
  
• October 12, 2012 9:58 PM
   ShaunHoggan
    Project Holder
  Drafts 61-54 look awesome!!! Nice work great changes. I have submitted these out to my customers to vote on.
  
  0   0
  
• October 10, 2012 7:59 PM
   FiddlinNita
   
  I'll give it a try in the AM
  
  0   0
  
• October 10, 2012 6:53 PM
   ShaunHoggan
    Project Holder
  Draft 37, like it alot!!! Draft 36, it has been suggested to add radiating lines comming from the . in .net. I am not so sure... but it could work.
  
  0   0
  
• October 10, 2012 6:46 PM
   ShaunHoggan
    Project Holder
  Draft #37 Like it alot!!!
  
  0   0
  
• October 10, 2012 3:18 PM
   FiddlinNita
   
  Sorry. Reposting now. Nita
  
  0   0
  
• October 10, 2012 2:57 PM
   ShaunHoggan
    Project Holder
  FiddlinNita I love what you are doing! The only concern that I have is the logo should not contain a . after the Mt. That dot is not really part of the logo I am loving drafts 25, 32, 33
  
  0   0
  
• October 10, 2012 1:40 PM
   FiddlinNita
   
  Thanks,We can change that!! Nita
  
  0   0
  
• October 10, 2012 12:39 PM
   ShaunHoggan
    Project Holder
  FiddlinNita, Drafts 25,26,27 LOVE LOVE LOVE the waves above the text. LOVE the colors, NOT in love with the text or font of MtWire.net
  
  0   0
  
• October 10, 2012 3:53 AM
   ShaunHoggan
    Project Holder
  Schary, Draft 17, Love the wave, Thinking at this point the sizzors are a bad idea. I prefer the quarter sized lines comming off the "i" in draft 19. The smaller radiating lines comming off of the .net are not doing it for me.
  
  0   0
  
• October 10, 2012 3:45 AM
   ShaunHoggan
    Project Holder
  Draft 20 DraftAngel, can you split the M and W so there is a gap between them? Plus the shading on the ".net" is hard to read. Prefer the solid color on draft 19 for the ".net" Cool work!!!
  
  0   0
  
• October 09, 2012 11:49 AM
   ShaunHoggan
    Project Holder
  (Draft 19) DraftAngel, love the lines comming off the i at an angle. love the .net with the alternating color comming off at an angle. I also like the opposing M and W. Great use of the two letters on top of each other. While I dont think this is the end all of the logo, you may be on to something big. What if there were a line between the M and W removing all the text including mtwire.net so instead of having the lettering of mtwire.net it was just the M and W opposing each other. Great work!
  
  0   0
  
 
Load More